About Us
Copyright © 2008
Texchine Incorporated
Web Design by
ArtWorks Graphics
New Laundry Equipment
Flatwork Folding
Shortcuts:
Jenson Blanket Folding
Feeders
Jensen Folders
 Jenson Small Piece Folders
Jensen Specialty / High Production Systems
Jensen Blanket Folders
SILVERLINE
AERO

|STANDARD FEATURES
  • 350 pieces per hour with one operator, up to 500 with two.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Single station spreading clamps.
  • Clamps are adjustable between 3'1" and 3'11".
  • Automatic start of clamps.
  • Automatic belt tensioning.
  • Self cleaning photocells.
  • First crossfold achieved by knife, second by reversing conveyor.
  • Jam alarm on crossfold section with automatic by-pass of 1st lateral fold.
  • Service bridge on inlet conveyor.
  • Optional 3rd crossfold available.
  • Model without built-in feeder available.

APPLICATIONS

  • Hospitals, central hospital laundries.
  • Folding of thermal blankets, flannels.

MODELS

  • 1212 - Single lane with one or two primary folds and one or two crossfolds.
  • 1213 - Single lane with one or two primary folds, two or three centerfolds.

STANDARD FEATURES
  • Cycle time of 5 seconds or 720
    pieces per hour depending on linen size.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • One, two, or three lateral folds.
  • One or two crossfolds.
  • Lateral folds by reversing sandwich conveyors.
  • Crossfolds by knife between pinch rolls.
  • Quality control buttons for soiled and torn items.
  • Compact design.

APPLICATIONS

  • Commercial laundries, hospital laundries, central hospital laundries.
  • Folds airline blankets, health care blankets, towels.
  • Folds items up to 87" X 60".

FOLDS

  • Primary folds in half, French or by-pass.
  • Crossfolds in half, thirds, quarter or by-pass.
Jensen Small Piece Folders
JET
TOWELMASTER

STANDARD FEATURES
  • Cycle time of 3.2 seconds or 1125 pieces per hour depending on size of linen.
  • Realistic production number is 800 pieces per hour.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Lateral folds accomplished by programmable air blast.
  • Second crossed by means of reversing conveyor and air blast.
  • Automatic template adjustment by category.
  • High and low air pressure for lateral fold section.
  • Discharge back to the operator left or right side, to the rear left or right side or straight out of the back.
  • Belt driven. No chains.

APPLICATIONS

  • Hotels, hospitals, nursing homes, commercial laundries, central hospital laundries.
  • Folds airline blankets, pool towels, bath towels, hand towels, patient gowns, soaker pads, baby blankets, O.R. scrubs, knotted fitted sheets.

FOLDS

  • Primary folds in half or French.
  • Crossfolds in half, thirds or quarter.
  • Fold sizes:
    • Minimum 16" X 16"
    • Maximum 75" X 47"
BUTTERFLY COMPACT


STANDARD FEATURES

  • Cycle time of 3.2 to 4.2 seconds or up to 1125 pieces per hour depending on linen size.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Lateral fold accomplished by Butterfly knife method.
  • First crossfold by air blast between pinch rolls.
  • Second crossfold by reversing conveyor and air blast.
  • Discharge back to operator left or right side, to the rear left or right.
  • Automatic length measurement to sort different sized items when equipped with 2 or 3 conveyors.
  • Belt driven, no chains.
  • Also available as a uniform folder.

APPLICATIONS

  • Hotels, resorts, commercial laundries.
  • Very thick pool and bath towels.
  • Will also process health care products.
  • Specifically for locations requiring 100% quality folds.

FOLDS

  • Primary folds in half, French or bypass.
  • Crossfolds in half, thirds, quarters and bypass.
  • Fold sizes:
    • Minimum 16" X 16"
    • Maximum 72" X 47"
BUTTERFLY 900


STANDARD FEATURES

  • 400 to 500 pieces per hour from a tub or basket.
  • 550 to 650 pieces per hour from a hanger.
  • 650 to 750 pieces per hour from a "de-hanging station."
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Vacuum on inlet conveyor to hold garment.
  • Grading system for stain and tears.
  • Push button or auto start.
  • Sleeve inserter.
  • Lateral fold by Butterfly knife method.
  • Lateral fold section adjustable for thick or thin items.
  • Sandwich conveyor to press item prior to first crossfold.
  • Automatic gap adjustment in crossfold section to accommodate thick or thin items.
  • Automatic half, French or quarter fold depending on length of the item.
  • Automatic shut off when machine is not in use.
  • Available to mix feeds (pants, shirts, coveralls) and sort up to 3 separate delivery conveyors.
  • 900-II model allows for folding of towels with separate inlet conveyor at opposite end of machine.
  • NO COMPETITION!

APPLICATIONS

  • Commercial garment plants, garment manufacturers, commercial linen plants.
  • Folding of shirts, pants, coveralls, overalls, lab coats, and towels.
  • Plants using 3 or more people to fold by hand.

FOLDS

  • Primary folds in half, French and bypass.
  • Crossfolds in half, thirds, quarter, bypass.


STANDARD FEATURES
  • Cycle time of 3.2 seconds or 1080 pieces per hour depending on size of linen.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Very compact. Ideal for the smaller laundry.
  • Simple design and low maintenance.
  • Knife performs crossfold for thick items.
  • Optional sorting stackers available.
  • VERY AFFORDABLE AND COMPETITIVE.

APPLICATIONS

  • Hospitals, central hospital laundries, nursing homes, some hotels.
  • Folds towels, soaker pads, patient gowns, knitted fitted sheets.

MODELS / FOLDS

  • Fold sizes:
    • Minimum 16" X 16"
    • Maximum 72" X 49"

Towelmaster PLUS

  • Two primary folds, one crossfold and stack.
  • Two primary folds and stack or two primary folds, one crossfold and stack.
  • Two primary folds, two crossfolds and stack.
  • Two primary folds and stack or two primary folds and two crossfolds and stack.
    (First primary fold airboats between pinch rolls, second by reversing conveyor and air blast, crossfold by knife, stacking by butterfly drop stack.)

Towelmaster S

  • Two primary folds. One crossfold and stack
    (First primary fold air blast between pinch rolls, second by pick up and drop, crossfold by knife, stacking by cross stack method).

Towelmaster L

  • One or two primary folds and stack.
    (First primary fold air blast between pinch rolls, second by reversing conveyor.)
BUTTERFLY TEMATIC PRO


STANDARD FEATURES

  • Cycle time of 3.2 seconds to 4.2 seconds or up to 1125 pieces per hour depending on linen size.
  • Realistic production number is 700 per hour when feeding in triple sort mode.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Automatic width and length adjustment to sort by different sizes when equipped with 2 or 3 sorting conveyors.
  • Lateral fold accomplished by Butterfly knife method.
  • First crossfold by air blast between pinch rolls.
  • Second crossfold by reversing conveyor and air blast.
  • Discharge back to the operator left or right side, or to the rear left or right side.
  • Automatic template adjustment by category or by size.
  • Belt driven. No chains.
  • Also available as a uniform folder.

APPLICATIONS

  • Hotels, resorts, commercial laundries.
  • Very thick pool and bath towels.
  • Locations with a large amount of towels that are sorted by hand before folded.
  • Will also process health care products.

FOLDS

  • Primary folds in half, French or bypass.
  • Crossfolds in half, thirds, quarters or bypass.
  • Fold sizes:
    • Minimum 16" X 16"
    • Maximum 72" X 47"

Feeders
JENSEN EXTREME
JENSEN LOGIC 2000

STANDARD FEATURES
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Feeding station height.
  • Adjustable from 38" to 43.5" on wheels.
  • Feeding conveyor with accumulation.
  • Feeder speed synchronously.
  • Adjusted to ironer speed.
  • Spreading feature with vacuum.
  • Spreading belts.
  • Return to operator or misfed items in floor conveyor
  • Push button to open feeding bill to restart feeding operation.
  • Automatic reject function at alignment bar to drop twisted linen on floor conveyor.
  • Pivotable delivery conveyor with service bridge, to allow waxing of ironer.
  • Inlet conveyor pivots for the feeding of small pieces and wax cloth.
  • Fast disconnect air lines.
  • JENSEN Blue & Gray color scheme.
  • 208-240v/60hz/3ph.

The JENSEN Extreme Feeder is a 2 station, 1 lane large piece feeder especially for sheets. Available with feeding stations positioned on left and right side in front of the machine. Designed with particular attention to speed and productivity of sheet feeding by allowing the operators to feed the linen after having found only one side of the edge. The productivity of the operator is increased compared to normal clamp feeding. Designed to automatically center and feed sheets also in mixed operation with a minimum of adjustments. Up to 1200 sheets per hour.
STANDARD FEATURES
  • 900 to 1200 pieces per hour with 3 operators for hospital sheets.
  • 900 to 1000 pieces per hour for mixed double, kin and queen sheets.
  • 700 to 900 pieces per hour for mixed sizes of table linen.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Automatic leading edge sensor to increase spreading speed and auto adjust of spreading tension (allows for feeding of large and small linens in the same category, 45" to 01").
  • Pivoting lay-down clamps for high-quality leading and corner edges of all linens and ability to overlap pieces.
  • Vacuum to treat trailing edge (no pit required).
  • Self-cleaning air filters for consistent suction of vacuum box.
  • Capability of complete linen inspection.
  • 3 position adjustable feeding clamp heights.
  • Automatic start of clamps.
  • Data retrieval capabilities for each station.
  • Solid and torn buttons available for sorting at folder.
  • Excellent centering of linen due to high tech inverter and motor driven toothed belt (no slipping).
  • Automatic speed control.
  • Brush mounted V belts for higher quality of side edges.

APPLICATIONS

  • Large hotels, hospitals, commercial linen plants, central hospital laundries.
  • All types and sizes of sheets and table linen for single lane feeding.
  • Single lane feeding.
  • No pit required.
  • Ideal for high speed ironers (120-155 feet per minute).
JENSEN 1234 QUATRO FEEDER
CENTRAFEED EURO ESF

STANDARD FEATURES
  • 900 per hour on hospital sheets with 3 operators, 1050 with 4.
  • 600-700 per hour on kings and queens with 3 operators, 800 with 4.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Generation of the 1234 model that has been on the field for 25 years.
  • Each station is independently operated. Ability to operated other stations if one is down.
  • Dual spreading tensions that can be activated during feeding.
  • Vacuum under feed belts to reduce drops.
  • Automatic start of clamps.
  • Brush mounted V belts (ideal for treating side edge of 100% cotton items).
  • Independent counters for each station.

APPLICATIONS

  • Hotels over 400 rooms, hospitals over 250 beds, commercial laundries, central hospital laundries.
  • All sheets: ideal for king, queen and hospital types (pit may be required for king sheets).
  • Some table linen (not to be used as strictly a table linen feeder).
  • Single lane feeding.
  • Ideal for commercial laundry plant producing large amounts of sheets.
  • Ideal for central hospital linen plants.


STANDARD FEATURES
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • One operator, 250 to 350 pieces per hour depending on linen size.
  • Two operator, 400 to 500 pieces per hour depending on linen size.
  • Two different spreading pressures for different size linen.
  • Automotive start of clamps.
  • Compact and simple design.
  • Proper entering of every piece.
  • Maximum speed of 82 feet per minute.
  • Retractable beam for feeding of small pieces.
  • Fully programmable up to 99 different categories.
  • Variable speed control of inlet conveyor to match ironer speed.
  • Fast disconnect air lines.
  • JENSEN Blue & Gray color scheme.
  • 208-240V/60/30ph.

APPLICATIONS

  • Mid to small size hotels, smaller hospitals, small linen suppliers.
  • All types of sheets: hospital, king, queen, doubles.
  • All types of table linen (44s, 54s, 72s, 81s, etc.).
  • Single lane feeding.
  • Ideal for hotel laundries with single roll cylinder heated ironers with folders.
  • Allows one operator to feed where two would normally be required.
JENFEED BASIC FEEDER
JENFEED VARIANT 2000

STANDARD FEATURES
  • Can increase production from 15% to 30%.
  • Capabilities of 1000 to 1400 Visa pieces per hour and 800 to 1000 cotton pieces per hour.
  • Vacuum to treat trailing edge.
  • Vacuum to hold down leading edge.
  • Adjustable suction of vacuum.
  • Stainless steel templates to treat side edges.
  • Available in four or five lanes (six lane model available for wide ironer lines).
  • Automatic speed control.

APPLICATIONS

  • Large hotel laundries with restaurant and banquet facilities.
  • Commercial linen plants with dedicated small piece ironer lines.
  • Any small napkin ironer line that does not achieve at least 1,000 pieces per hour per lane.
  • Excellent quality on napkins, bar towels, O.R. towels.

JENFEED SUPER CENTRO


STANDARD FEATURES
  • PLC control system with operating panel CT 1081 including digital counters.
  • Feeder speed synchronously adjusted to ironer speed.
  • Vacuum under feed belts.
  • Suction box with driven roller for large pieces.
  • Automatic centering per lane.
  • Service bridge with handrails.


STANDARD FEATURES
  • 1000 to 12000 34", 45", 45" table linen pieces per hour in two lanes (500-600 per lane).
  • 600 to 800 61" and up table linen pieces per hour in single lane.
  • 700 to 800 pieces per hour of mixed sizes (34" to 91") in automatic one and two lane mode.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Two feeding stations.
  • Multiple feed station locations.
  • Ergonomically designed clamp height.
  • Automatic start of clamps.
  • One or two lane feeding or automatic one or two lane feeding.
  • Vacuum to treat leading edge.
  • Programmable spreading tension.
  • Adjustable trailing edge vacuum by category for different material types.
  • Automatic speed control.
  • Brush mounted spreading V belts for higher quality of side edges.
  • Data retrieval capabilities for each station.
  • No pit required.
  • Available with built in small piece napkin feeding capabilities.

APPLICATIONS

  • Commercial linen plants producing 3,000 pieces of table linen per day and more.
  • Ideal for all material types: cotton, VISA, spun poly.
  • For plants here 30% or more of their linen use 35", 45" and 54".
  • Single lane feeding, two lane feeding or automatic one and two lane feeding depending on the model chosen.
  • Available on a 157" wide system to feed up to 76" pieces in two lanes.
Stackers
JENSEN ROLLOFF SINGLE
JENSEN MAXSTACK SINGLE OR DUAL

STANDARD FEATURES
  • Six foot discharge conveyor.
  • Preset counter for determining number of pieces in each stack.
  • Rejects mis-folded items.
  • Bypass system.
  • Complete interlocked safety guards and stop buttons.
  • Fast disconnect air lines.
  • JENSEN Blue & Gray color scheme.
  • Powered from JENSEN folder/crossfolder.


STANDARD FEATURES
  • Up to 1400 pieces per hour.
  • Six foot discharge conveyor.
  • Preset counters to determine stack amount.
  • Completely programmable from JENSEN folder/crossfolder.

APPLICATIONS

  • Any facility with a large piece folder.
  • For installation on ironer lines with folders producing mixed items on one category (e.g., king sheets, queens, doubles, singles). Creates a buffer zone to complete sort by size and color and wrap by one operator.
  • Dual stackers recommended for ironer lines producing all sizes and colors of table linen on one category. Creates buffer zone to complete final sort by size and color and wrap by one operator.
JENSEN DRAPE N STORE
JENSTACK BOTTOM UP
STANDARD FEATURES
  • Can stack 1800 to 2000 pieces per hour per lane. 1000 to 1400 is the realistic stacking number based on operator feeding capability.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Available in 4 to 6 lanes.
  • Each lane has 10 bars of which 3 can be full at one time.
  • Each piece is held on the stacking bar while an air blast blows the trailing edge.
  • Air blast is adjustable by category.
  • Audible signal to indicate when all three bars are full.
  • Pre-determined stack amounts by category.
  • Optional driven bypass table available processing of non-stacked pieces.

APPLICATIONS

  • Mostly suitable for commercial linen plants producing large amounts of napkins.
  • Needed wherever you use multiple operators at the back of the ironer manually stacking small pieces.
  • Is also used in the field to stack pre-folded aprons and as a stand-alone shop towel stacker.

STANDARD FEATURES
  • 120" working width.
  • PLC system CT 1081.
  • Fully programmable up to 99 different categories.
  • Stacks items that have been primary folded.
  • Bypass system for larger pieces.
  • Production counters for each line.
  • Each lane independently operated.
  • Automatic discharge when stack amount is reached.
  • Automatically discharges mis-folded items.
  • Fast disconnect air line.
  • JENSEN Blue & Gray color scheme.
  • Voltage 208-240v/3/60.

CENTRASTACK MFS
CENTRASTACK DRAPING STACKER

STANDARD FEATURES
  • PLC control system and control panel CT 1801 is standard, giving preset number per lane and production per lane.
  • Speed synchronously adjusted to folder in front of.
  • By-pass possibility to rear table.
  • By-pass to rear table for linen longer than 550 mm.
  • Pivotable inlet conveyor (down in full width) to have easy access for service.

STANDARD FEATURES
Jensen Folders
JENSEN SILVERLINE PLUS
JENFOLD CLASSIC

STANDARD FEATURES
  • Speed range of 20 to 150 feet per minute with optional variable speed drive.
  • Can easily fold up to 1400 pieces per hour, however feeding of linen at this pace is not usually possible.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Self-cleaning photo cells.
  • Automatic belt tensioning in crossfold section.
  • Service bridge across inlet conveyor.
  • Reversible crossfold section.
  • Last crossfold by knife.
  • Compact design.
  • Jam alarm in crossfold section with auto bypass at primary fold.
  • Has been in the field for over 15 years.

APPLICATIONS

  • Suitable for any laundry utilizing a single roll 24" ironer and larger.
  • Hotel laundries, hospitals, commercial plants, central hospital laundries.
  • Ideal single lane folder for table linen.
  • Will process all types of sheets, table linen, pillowcases, and napkins.
  • Available as primary fold only.

MODELS

  • Primary fold only models 12 through 52. First number represents the number of lanes. The second number represents the number of primary folds.
  • Primary and crossfold models numbers represent the following:
    • First number is the number of lanes.
    • Second number is the number of primary folds.
    • Third number is the number of lanes in which you get a crossfold.
    • Fourth number is the amount of crossfolds (e.g., 1213 = single lane; 2 primary folds; single lane; 3 crossfolds).

NOTE: If 3 primary folds are required go to the Classic "S" pricing.
STANDARD FEATURES
  • Speed range of 20 to 150 feet per minute with optional variable speed drive.
  • Can easily fold up to 1400 pieces per hour, however feeding of linen at this pace is not usually possible.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • 2213/22 model provides 1 or 2 primary folds and 2 or 3 crossfolds in single lane operation or 1 or 2 primary and 1 or 2 crossfolds in two lanes.
  • Capable of three primary folds as an optional feature.
  • Self-cleaning photo cells.
  • Automatic belt tensioning in crossfold section.
  • Service bridge across inlet conveyor.
  • Reversible crossfold section.
  • Last crossfold by knife.
  • Compact design.
  • Jam alarm in crossfold section with auto bypass at primary fold.
  • Has been in the field for over 18 years.

APPLICATIONS

  • For primary and crossfolding of table linen in both one and two lanes.
  • Ideally matched with the Variant 2000 table linen folder.
  • For commercial laundries or any facility processing large amounts of two lane pieces of table linen (34", 45", 54").

MODELS

  • Primary and crossfold models numbers represent the following:
    • First number is the number of lanes.
    • Second number is the number of primary folds.
    • Third number is the number of lanes in which you get a crossfold.
    • Fourth number is the amount of crossfolds:
      • First is the number of lanes in which you get a crossfold and the...
      • Second is the number of crossfolds (e.g., 2213/22 = 2 lane; 2 primary folds; 1 lane; 3 crossfolds plus 2 lane, 2 crossfolds).

NOTE: If a single lane crossfolding machine is required with 3 primary folds, use the "S" pricing
JENSEN OLYMPIC
JENSEN MAGIC

STANDARD FEATURES
  • Multilane unit for high-precision folding and compact stacking of small pieces and bib aprons.
  • Makes 0, 1, or 2 lateral folds in up to 5 lanes by reversing conveyors and air blast.
  • Will follow any usual speed for small piece folding up to 30 m/min.
  • Min. cycle time depending on linen size 2-3 sec.

STANDARD FEATURES
  • 120" working width.
  • PLC control system with CT 1081, including digital counters.
  • Fully programmable up to 99 different programs.
  • High quality folding by the reversing conveyor. No air blast.
  • Total bypass through the folder, unfolded.
  • Variable speed - adjust to Ironer speed or preset per category.
  • Low noise level.
  • Coupling of lanes to fold items larger than single lane dimension.
  • Service bridge with handrails mounted on inlet conveyor.
  • French folding.
  • Complete interlocked safety guards and stop buttons.
  • Fast disconnect air lines.
  • JENSEN Blue & Gray color scheme.
  • 208-240v/60/3ph.
JENSEN UNIVERSAL L
JENFOLD CLASSIC-S

STANDARD FEATURES
  • PLC Control system with operator panel CT 1801, including digital counters.
  • Virtual LED indicators for control of operation in PLC rack.
  • Maintenance free photo cells - needs no cleaning.
  • Safety guard.
  • Individual air pressure regulators.
  • Heavy duty motors with built-in overload protection.
  • Folder speed synchronously adjusted to ironer speed.
  • Bypass through the machine.


STANDARD FEATURES
  • 120" working width.
  • PLC system CT 1081.
  • Fully programmable up to 99 different programs.
  • Variable speed - adjust to Ironer speed or preset per category.
  • Variable speed - adjust to Ironer speed or preset per category.
  • Reflectorless photocells.
  • Automatic belt tensioning on crossfold section.
  • Permanently guarded pinchrolls for safety.
  • Capability of reversing delivery side.
  • Bypass any or all folds.
  • Production counters per lane.
  • Last crossfold always by knife.
  • Third crossfold with selvage edge inside.
  • Jam alarm, with automatic bypass.
  • Transport wheels.
  • Service bridge with handrails mounted on inlet conveyor.
  • Complete interlocked safety guards and stop buttons.
  • Anti-static belting in lateral fold section.
  • Fast disconnect air lines.
  • JENSEN Blue & Gray color scheme.
  • 208-240v/60/3ph.
Jensen Specialty / High Production Systems
JENSEN BIB APRON SYSTEM
CENTRAL VARIANT 2000 /
CLASSIC SYSTEM

STANDARD FEATURES
  • Capable of up to 700 pieces per hour per lane.
  • Realistic feeding capabilities of the operators are 500 to 600 pieces per hour per line.
  • Up to 1,000 pieces per hour per lane for napkins or bar towels.
  • Microprocessor controlled with up to 99 programmable categories.
  • Data retrieval capabilities for statistics of each category.
  • Available in three to five lanes. One lane stand alone models also available.
  • Accurately reversing one or two folds that bury the neck piece and contain strings to the inside of the apron.
  • Utilizes the positive Butterfly method of crossfolding with knives.
  • Makes one or two primary folds in halves or thirds, two crossfolds in thirds, and stacks to a pre-determined amount.
  • Service bridge on inlet conveyor.
  • Lanes can be coupled to primary fold and stack larger items such as table linen.
  • NO COMPETITION.

APPLICATIONS

  • Most commercial linen plants.
  • Any plant processing more than 5,000 to 6,000 aprons per day.
  • Any plant with more than one operator at the back of the ironer.
  • Can also process other small piece items such as bar towels and napkins that may require one or two primary folds and stack.

STANDARD FEATURES

JENSEN VIKING II PICKER


STANDARD FEATURES

  • PLC system CT 1081.
  • Ergonomic design.
  • Automatic speed control.
  • Feeding conveyors may be placed in either side of separator.
  • Delivery conveyor to be delivered to meet needs of existing or new feeding devices. Price to be determined upon final design.
  • All VIKING designs shall include agreed upon copy of detailed layout.
  • Fast disconnect air lines.
  • JENSEN Blue & Gray color scheme.
  • 208-240v/60/3ph.