About Us
Copyright © 2008
Texchine Incorporated
Web Design by
ArtWorks Graphics

New Laundry Equipment


Ironers

Shortcuts:
Sharper Finish Ironers
Jensen Ironers

Sharper Finish Ironers
Challenger
Finish Master (Built-in folder)

STANDARD FEATURES
  • 12"-36" diameter revolving steel heated cylinder.
  • All models have a working width of 120" (3050mm). Other ironing widths available.
  • Available Gas or Steam heated.
  • All models equipped with standard variable speed range of 25-75 FPM (7.7-23m/min.). "Fixed Speed" also available.
  • Canopy complete with exhaust motor and blower is standard on all models.
  • Folded flatwork can be removed from front (F) or rear (R) of the machine.
  • Intelatrol I and II are standard on gas models.
  • ETL Approved.
STANDARD FEATURES
  • 16", 20", or 24" diameter revolving steel heated cylinder.
  • All models have a working width of 120" (3050mm).
  • Available Gas, Steam, or Electrically heated.
  • All models equipped with standard variable speed range of 15-45 FPm (4.6-13.8m/min.). "Fixed Speed" also available.
  • Canopy complete with exhaust motor and blower is standard on all models.
  • Built-in automatic folder increases protection and reduces labor costs.
  • Clearly the most versatile machine in its class. Adding one more operator will more than double potential production.
  • Folded flatwork can be removed from front (F) or rear (R) of the machine.
  • The only machine that can fold a round tablecloth.
  • Intelatrol I Automatic Monitoring System standard on gas and electric models.
  • ETL Approved.

Party Rental Special
STANDARD FEATURES
  • Faster, lower costing processing
  • Smoother, more attractive table lines
  • Reduced linen wear
  • Quick availability of the entire linen inventory

Jensen Ironers
Jenroll EX
Jensen EXPG Self-Contained Ironer
Gas Fired/Thermal Heated - 32", 40" & 48" ROLL

STANDARD FEATURES
  • AC motor with frequency inverter, soft start.
  • Steam enters into first chest first resulting in high steam velocity for extraordinary drying capabilities.
  • Multi chamber chests and gap pieces ensuring direct heating.
  • Chests have built in steam/condensate separators to prevent condensate transfer to the next roll.
  • Exhaust fan for each roll with a manually adjustable throttle valve.
  • Direct drive via a planetary gear on each roll to minimize counter-torque of the roll (better uniform ironing pressure).
  • Rolls raise to 16" for chest service capabilities.
  • One inch of insulation inside the inner frame, four inches of heavy insulation for the chest.
  • Safety lifting devices for each roll.
  • All rolls lift automatically in case of power interruption.
  • Canopies for each roll.
  • ASME certified chests.
  • Easy maintenance, no grease points.
  • All service performed on sides of ironer. No components under the ironer.
  • Self tensioning on all belts.
  • Simple to install.

APPLICATIONS

  • Hotels, hospitals, commercial laundries, central hospital laundries.
  • Laundries that require 1,000 lbs. a day or more of flatwork finishing.

MODELS

  • EX 32 - One roll 350 lbs./hour; 2 roll 900 lbs./hour; 3 roll 1400 lbs./hour.
  • EX 40 - One roll 500 lbs./hour; 2 roll 1300 lbs./hour; 3 roll 1800 lbs./hour.
  • EX 48 - One roll 850 lbs./hour; 2 roll 1600 lbs./hour; 3 roll 2100 lbs./hour.
  • Production rates will vary depending on moisture retention, material type, padding and steam pressure.

STANDARD FEATURES
  • Springpress padded rolls, covered with NOMEX padding.
  • Fully adjustable operating temp (332-492 Degrees Fahrenheit)
  • 2-Step burner: 121kW & 195kW
  • Boiler with 76.4 ft2 heated surface.
  • Oil circulation: 847 ft3/hr, 52 degree Fahrenheit temp. drop, 58 psi pressure drop.
  • 10.5 gallon expansion tank.
  • Flow control, oil lever controls, temp control.
  • Insulated chimney: dia-7.75" (pressureless) or dia-5" (pressurized).
  • Oil strainer (before and after boiler).
  • Special tape to measure roll diameter.
  • Analog ironing pressure display, per roll.
  • Digital speed indicator.
  • Digital display of exhaust outlet temperature of first roll.
  • Voltage - 480v/60hz/3ph - plus or minus 5%.
  • AC motor with frequency converter for infinite speed control.
  • Manual exhaust fan control on each roll.
  • Insulation inside inner frame (1 inch) and heavy insulation of chest (4 inches).
  • 1/8" steel plating protecting chest.
  • Front and rear is totally enclosed.
  • Each roll individually lifts vertically.
  • Safety lifting device for all rolls.
  • All rolls life automatically in case of power interruption.
  • Two emergency stop buttons in front and rear of ironer.
  • Feeder and folder connections for power, control, and air supply.
  • Canopies including handrail and ladder.
  • Elevated tape tensioning device.
  • JENSEN blue & gray color scheme.

MODELS

  • EX 8 - 32" diameter; 1 roll 3000;2 roll 3000.
  • EX 12 - 48" diameter; 1 roll 3000;2 roll 3000.

Jensen EXPress Ironer
Flexible Chest/Steam Heated - 40" & 48" ROLL
STANDARD FEATURES
  • Modular construction; rolls may be added at any time.
  • Springpress padded rolls with polyester padding.
  • Special tape to measure roll diameter.
  • Analog ironing pressure display, per roll.
  • Digital speed indicator.
  • Digital amp meter indicator.
  • Digital display of exhaust outlet temperature of first roll.
  • Voltage 220V/30/3, 480V/60/3 plus or minus 5%.
  • AC motor with frequency converter standard for infinite speed control.
  • Manual exhaust fan control on each roll.
  • Insulation inside inner frame (1 inch) and heavy insulation of chest (4 inches).
  • 1/8" steel plating protecting chest.
  • Front and rear is totally enclosed.
  • Each roll individually lifts vertically.
  • Safety lifting device for all rolls.
  • All rolls lift automatically in case of power interruption.
  • Two emergency buttons on front and rear of ironer.
  • Feeder & Folder connections for power, control, and air supple.
  • Canopies including handrail and ladder.
  • Elevated tape tensioning devices.
  • JENSEN blue & gray color scheme.

MODELS

  • EX 10 - 40" diameter; 2 roll 3000.
  • EX 12 - 48" diameter; 1 roll 3000;2 roll 3000; 3 roll 3000.